Armory
The care, use, maintenance & safety of Black Powder & Edged Weapons.
490 topics in this forum
-
- 0 replies
- 4.1k views
From time to time, there are questions about traveling with black powder weapons. A couple of things to keep in mind about the following information is that generally, if it LOOKS like a gun, the authorities consider it to be a gun, therefore non-firing replicas get treated the same as real weapons. You don't want to try to explain to a non-knowledgeable gate agent what the difference is !! The other thing to understand is that the following information is correct AS OF THE TIME OF POSTING. Regulations and the interpretation of them by people in charge are subject to change on short notice, or no notice at all !!! Check with the airline you are flying with b…
Last reply by Cascabel, -
- 1 follower
- 6 replies
- 7.4k views
At the request of Lord William Brand here is my review of the Pirate Fashions Cutlass. If I missed a detail in my review please feel free to ask and I’ll be happy to answer to the best of my ability This first part sounds like a warning but it’s really not. Make sure you know who the manufacturer is before making your purchase. After purchasing my sword from Pirate Fashions I discovered these cutlasses are produced via a contract with Deepeeka and my heart sank. I have owned four swords from Deepeeka and I have sold every one of them, in my experience they are more like handling a crowbar attached to a hilt rather than an actual sword. I am happy and very ple…
Last reply by William Brand, -
- 1 follower
- 6 replies
- 1.5k views
I made this one a while back and took pictures of the build pictures . . . First was deciding what to build, I found this original lock that needed minor repair and being a Spanish lock the build of the gun followed. The next was to come up with a stock so a sketch on acad printed up to scale on multiple pages Now knowing size I could begin on the barrel starting with a piece of solid stock. Checking the barrel with the lock the next is to cut out the stock. Power tools can hog out a good portion but once you get close it needs to be done by hand. …
Last reply by LadyBarbossa, -
- 4 replies
- 551 views
I starte work on this new piece and as you can see it is still a work in progress but I thought you would like to see regardless. It is a Spanish circa early 1700 when Spain began adopting the french style lock (the unbridled frizen and miquelet style cock date it as an early version of what would become common) this would have been built for a wealthy nobleman, someone travelling to the new world or returning overseeing the shipment of his property. Such a weapon if seized by pirates would have been selected by someone of high rank upon division of the prize. It is very well proportioned and does not show its size (.85 caliber 4.5 lbs!) a true beast that …
Last reply by madPete, -
- 7 replies
- 548 views
Thought I would post some of my favorite weapons of the Spanish miquelet variety...
Last reply by Commodore Swab, -
- 0 replies
- 302 views
50 cal rifle and 62 smooth on top, 32 rifle on bottom
Last reply by Commodore Swab, -
- 2 followers
- 13 replies
- 1.5k views
So, i have two hand forged knives that were part of my "kit" years ago. In trying to put whole knew set of gear together they have surfaced out of the storage bin the have been in for over a decade and they are in need of some love. They are both hand forged. One is a small hook shaped knife, (i believe stainless) with antler handle. This one has minimal tarnish. The other is twist handle single piece knife, forged out of an old railroad spike. This one is....worse for the neglect. Covered in what appears to be rust, but primarily only on the blade that had been in a sheath, which seems counter intuitive to me and leads me to question if maybe it'…
Last reply by Stynky Tudor, -
- 16 replies
- 5.5k views
Which flints are the best? I have been using English, I am thinking about switching to German Agate Flints. Any comments or thoughts??
Last reply by Picaroon Lagoon, -
- 1 follower
- 13 replies
- 1.6k views
Here is a Queen Anne pistol from a Rifle Shoppe kit. The last pic is a Pedersoli Queen Anne for comparison. two different animals...
Last reply by LadyBarbossa, -
- 1 reply
- 713 views
Hi I was wondering when Flint Gunlocks were started generally used by Naval Powers, British Empire 1745, French 1805, but what about the other Naval powers and Barbary Pirates. LW
Last reply by Commodore Swab, -
- 1 follower
- 29 replies
- 4.7k views
I came across this wonderful 17th-Century Steel Wheellock Combination Powder Flask, Spanner Wrench, Screwdriver and Pricker. It's made of Of polished steel construction, the tapered octagonal flask with spring-loaded spout cover, Side-mounted square spanner and pricker. Domed pommel with integral screwdriver. Steel ring mount. Length: 8-inches. http://www.collector...g01/Lot-183.htm
Last reply by Stynky Tudor, -
- 3 replies
- 317 views
I just want to introduce myself as a new moderator to the Armoury. As MadPete (Peter Chaaps), I've been on the pub and in the pirate world since 2009. You may know me from the Fort Taylor Pirate Invasion, Searles, Ojai, Dana Point, Utah Pirate Invasion, Long Beach, or Put In Bay. Prior to my turning Pirate, I was heavily involved in American Civil War artillery groups, American War for Independence, and general black powder shooting. There are some big shoes to fill here as moderator with the passing of Cascabel. I only hope I can do a satisfactory job... Kudos to our dearly departed Cascabel for the great job he did here in the past. Dont be afraid …
Last reply by madPete, -
- 16 replies
- 5.7k views
In my Trade Thread POD offered to trade me two custom sword belts for a Boucan Knife and this is what I came up with. We also took a pattern and put it into our production line on a bit longer blade. We are calling it our Caribbean. Look for that soon. I already made 2 of them for a stage combat show in Jersey. I think it turned out well. The production version flares a bit more towards the end to make it a bit nicer fit to the tang. This is a nice and simple design that allows us to keep the peice down.
Last reply by madPete, -
- 5 replies
- 1.5k views
I know there've been quite a number of topics about various swords on the market, but nothing with really good reviews for those of us searching for a period (or almost period) weapon. So I figured I'd try and get the ball rolling on it with a few of my own. First, the Anix Cutlass by Depeeka http://kultofathena.com/product.asp?item=AH4225 First impressions of the sword are good. It looks nice and vaguely period. I've not seen a sword of its type from the period, but I haven't looked too hard either, and it certainly has a simplistic, piratical look. The build quality seems pretty good. Carbon steel blade, full tang, peened pommel. I haven't used it in impact or c…
Last reply by Cascabel, -
- 44 replies
- 6.9k views
Can we all agree to please stop pointing guns that can be fired, as well as sharp daggers and swords at people while posing for a picture? Please...
Last reply by Capt. Calico, -
- 45 replies
- 13.9k views
William steps up quietly upon his soapbox. I recently surveyed several 'pirate festivals' by perusing pictures and videos from as many as seven different events. The videos were typical of most pirate gatherings, featuring everything from duels to dancing, parades, small arms fire, and not a little drinking. Out of hundreds of photos and nearly thirty minutes of combined video, I found that I was bothered on some level by the complete lack of presentation when it comes to the most basic aspect of piracy. Sailors. Working sailors. Do I see pirates? Yes. Some more obvious than others. Caricatures, certainly. Do I see sailors? Almost never. I bring this up on…
Last reply by William Brand, -
New Swivel
by BCarp- 7 replies
- 1.4k views
Just arrived in yesterday's mail - a wee pop-gun to arm the bow of my boat (see: https://pyracy.com/index.php/topic/19378-soon-to-be-afloat/). 15" barrel, .75 caliber bore (stainless steel lined), weighs about 13 lbs. Now, I have to get the swivel yoke and tiller fabricated for it and it'll be ready to mount!
Last reply by MaxBuchanan, -
- 3 replies
- 1.2k views
Hey, a friend just had the mainspring on his Pedersoli Queen Anne Pistol go out.... So far google has not been kind to me. Does anyone know of a source for replacement parts? Track of the Wolf only seem to have the replacement mainsprings for the Pedersoli Bess's, and I am unsure if any of the springs sold by L&R, RE Davis, or Dixie Gun works will fit as a substitute. I figure with the way this model of pistol proliferates the pirate reenactment community, someone here has to have experienced this problem in the past and can offer some good advice to pass onto my friend. Thanks!
Last reply by Iron Hand, -
- 20 replies
- 2.8k views
I finally did it. After screwing up a piece of cherry, then walnut, I have commissioned Mr. Jeff Miller of flintlock forge in Maine to build it for me. It will look something like this one when finished: http://www.williammaloney.com/Aviation/WestPointMilitaryMuseum/Muzzleloaders/images/10GermanWheellockMoorishShnaphaunceKurdishMiqueletEnglishFlintlockMusketoonSwissFlintlock.jpg The top one with the Dutch club butt. I was going to go for carbine, but I decided that since I am no longer doing living history/reenacting I want something I can hunt with. It will be .58 smooth, iron mounted cherry. Hopefully by this time next year I will be turkey hunting with it. I'll tr…
Last reply by William Brand, -
- 5 replies
- 1.8k views
Date: September 16, 2014 Contact: Mike Litterst, 410-962-4290 ext. 886 Media Statement: Cannon Breech Failure at Fort McHenry National Monument and Historic Shrine on September 16 BALTIMORE –During the firing of a reproduction historic cannon at Fort McHenry National Monument and Historic Shrine on September 16, 2014, the breech of the gun failed, according to the National Park Service. At approximately 11:30 a.m. on September 16, the park's living history gun crew used black powder to fire a salute to a passing ship as part of the weeklong series of events celebrating the 200th anniversary of the Star-Spangled Banner. The firing of black powder in the reproductio…
Last reply by Littleneckhalfshell, -
- 8 replies
- 2.3k views
sometimes ideas just pop into my head and one of them just did...... I have two Traditions PA Pellet Flintlocks with nylon stocks, I use them for muzzle loader deer season here in NY. My thought was to try to make them look more period by constructing a new wooden stock for one of them. Back in the day (I constructed a Numrich Arms flintlock kit where the stock was roughed out and you had to do the finer details and it didn't turn out too bad, nothing professional or worth any awards but it looked good to me. i have many woodworking tools available to me, I have aged cherry wood in larger sizes, plus access to some walnut. Since the Traditions is NOT a long rifle, bu…
Last reply by Capt. Bo of the WTF co., -
- 7 replies
- 1.6k views
(CNN) -- What was supposed to be a celebratory lesson in American history has sent three children to the hospital. They were a part of a Civil War re-enactment group watching a parade in Orem, Utah, when a cannon set off an explosion Saturday. Witnesses said two of the three children injured were initially engulfed in flames, according to CNN affiliate KUTV. "When the flames went up in the air these three children started crying. One little girl's clothes were on fire, we're told," witness Brittany Tait told KUTV. "People were running with water to douse her." The blast happened at the start of the parade, the city's Department of Public Safety said. The cannon wa…
Last reply by Merrydeath, -
- 11 replies
- 1.7k views
blair higgins of LOYALIST ARMS is going to add another boarding axe to their line. he is asking or polling for comment on 4 prototypes on the facebook page "WORLD WIDE PIRATE COMMUNITY"
Last reply by Silver, -
New Cutlass
by BCarp- 6 replies
- 1.5k views
Recently received my new blade from Mike MacRae of "Scotia Metalwork" in NC. He mostly does Scottish stuff, but will do custom work as well. I think he did a great job working from some photos of originals I sent, especially this one:
Last reply by 1stMate Matt, -
- 11 replies
- 4.2k views
Ok this may not belong here, but it may. I have been looking everywhere for affordable pistol kits for the GAoP period. All I can find is very expensive kits without barrels or out of period kits. There was a time you could get these at Woolworth. Anyway. Does anyone have a good source? Just a little info, I'll only use these for blanks, at reenactments and events, they don’t have to be topnotch stuff, just something that looks good and blowup in my face. Thanks all Black Jack
Last reply by Stynky Tudor,
-
Make a Donation
-
Support Pyracy Pub
-
Upcoming Events
-
Albums
-
New Year, New Duds for Sully
- By Sully Cross,
- 0
- 3
- 3
-
Merch
- By Stynky Tudor,
- 2
- 16
- 8
-
Misc
- By Stynky Tudor,
- 0
- 29
- 19
-