Patrick Hand Posted May 17, 2007 Share Posted May 17, 2007 A couple of members of Tales of the Seven Seas started throwing Hawks and Knives, (We had a lot of fun throwing sharp objects at the Queen Bess Faire..) so I decided to start doing it again also.... As I was waiting for my internet conection to get hooked up again, I didn't waste the time, so I made a few throwing knives.... From the top down... a chunk of 1/8" x 1 1/2" - 3FT. "WELD STL-FLAT" that I bought at the Hardware store for about $5.00, marked for cutting... a 2" blade after cutting it with a metal cutting blade in my jig saw.... before grinding ... Three Finished blades. I epoxy heavy leather scales to the blade, and then use a cut off nail for a rivet. The one at the bottem, (with the red handle/scales) I'm giving to Red Handed Jill... just don't tell her... it's a supprise...... Throwing knives don't have to be tempered, if they bend, you just straighten the blade. Nor do they need a sharp edge (the ones in the photo just have a bit ground down to look like an edge.) And all of them throw realy sweet.... I also have a throwing "Hawk" that I'm modefing, I'm going to add langets like the one from the Pirate Soul Musseam, riveted through the handle...(will post photos of that when it's done) I'm also going to be making a folding stand to hold a wood round (for a target) that I can take to events... If I don't get interupted, or spend too much time catching up on Pub postings.... I may be able to get that done tonight... I've been throwing the knives at an old chunk of 1/2" plywood.... but now there is a hole through it... so I need a better target..... Link to comment Share on other sites More sharing options...
OL Jack The Pirate Posted May 18, 2007 Share Posted May 18, 2007 those be some mighty fine knifes you have there patrick have you tried them out on anything or anyone Link to comment Share on other sites More sharing options...
capnwilliam Posted May 18, 2007 Share Posted May 18, 2007 You always make great knives, Patrick, congratulations! Capt. William "The fight's not over while there's a shot in the locker!" Link to comment Share on other sites More sharing options...
Red-Handed Jill Posted May 18, 2007 Share Posted May 18, 2007 Cat's out of the bag - THANKS PATRICK!! Link to comment Share on other sites More sharing options...
Ransom Posted May 18, 2007 Share Posted May 18, 2007 Honestly, Patrick, is there anything you CAN'T make? I don't think so. Very nice knives indeed. Lucky Red-Handed Jill. ...schooners, islands, and maroons and buccaneers and buried gold... You can do everything right, strictly according to procedure, on the ocean, and it'll still kill you. But if you're a good navigator, a least you'll know where you were when you died.......From The Ship Killer by Justin Scott. "Well, that's just maddeningly unhelpful."....Captain Jack Sparrow Found in the Ruins — Unique Jewelry Found in the Ruins — Personal Blog Link to comment Share on other sites More sharing options...
CaptainJackRussell Posted May 18, 2007 Share Posted May 18, 2007 Honestly, Patrick, is there anything you CAN'T make? Maybe that's because he's got his name... Great work. Unfortunately I'm not a craftsman at all. Link to comment Share on other sites More sharing options...
HarborMaster Posted May 18, 2007 Share Posted May 18, 2007 Great work Mr.Hand ! i am not sure how the nail-rivet works or what it is .,but it looks like it works well. Great work sir ! I am not Lost .,I am Exploring. "If you give a man a fire, he will be warm for a night, if you set a man on fire, he will be warm for the rest of his life!" Link to comment Share on other sites More sharing options...
Patrick Hand Posted May 18, 2007 Author Share Posted May 18, 2007 i am not sure how the nail-rivet works or what it is It's just using a nail for a rivet.... drill the hole through the handle, just large enough for a nail to fit in.... grind the nail ends flat, with just a little sticking out.....and then pean them over with a hammer.... And nails are a lot cheaper than buying rivets...... Link to comment Share on other sites More sharing options...
Duchess Posted May 18, 2007 Share Posted May 18, 2007 and you know its more fun to get nailed than rivoted! (I am occasionaly struck with the fancy to be dirty!) Link to comment Share on other sites More sharing options...
Patrick Hand Posted May 27, 2007 Author Share Posted May 27, 2007 I finnaly got around to making a stand to hold a wood round on (to use as a knife and axe target), so I have something other than the sheet of 1/2" plywood that I broke a hole through..... It's not very pretty, but it dosen't have to be..... Now to keep bothering the people that said they had a wood round to give me for a target..... or else just go out into the woods, and find one.... (there are some advantages to living up in the mountains......) I discovered that just using epoxy to hold the handle scales on dosen't work.... they also have to be riveted ... Link to comment Share on other sites More sharing options...
 {if(f.fbq)return;n=f.fbq=function(){n.callMethod? n.callMethod.apply(n,arguments):n.queue.push(arguments)}; if(!f._fbq)f._fbq=n;n.push=n;n.loaded=!0;n.version='2.0'; n.queue=[];t=b.createElement(e);t.async=!0; t.src=v;s=b.getElementsByTagName(e)[0]; s.parentNode.insertBefore(t,s)}(window, document,'script', 'https://connect.facebook.net/en_US/fbevents.js'); fbq('init', '1074427760321280'); fbq('track', 'PageView'); </script> <noscript><img height=)
&ev=PageView&cd%5Bitem_id%5D=10715&cd%5Bitem_name%5D=Axes+and+Knives&cd%5Bitem_type%5D=topic&cd%5Bcategory_name%5D=Thieves Market"/>
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now