Jump to content

map frame project


madPete

Recommended Posts

So a friend has commissioned me to build a leather map frame to protect a map and which rolls up and fits into her map case.

map size is approx 16 X 22. essentially it will be like a picture frame, with the back tooled with a similar map.

so here are the humble beginnings:

https://picasaweb.google.com/lh/photo/R1jYmTuiId6Mc3UKcJl5YIsHQv063_3yt8uZINcLaKo?feat=directlink

https://picasaweb.google.com/lh/photo/sMYcf0dj8toRZ8T3S6USo4sHQv063_3yt8uZINcLaKo?feat=directlink

Remember measure twice cut once? Well, half the challenge in leather is a good plan and accurate measurements. For the

map to fit and have the frame stitched around the edge to hold it in place, I added 3/4 inch to dimensions. the stitching will

be 1/4 inch from the edge all the way around, so the overall size has to be sightly larger to accomodate the map.

One challenge here is that we need a thin piece of leather so that it rolls up with the stitched frame around it.

This is diametrically opposed to stamping a pattern in the leather. The thicker the leather, the more depth you get when you

tool it. So this is the thinnest leather I think I can tool sufficiently.

Basically the leather is dampened, the map laid over it and pinned in place. Now with a ball point pen I trace the pattern onto

the damp leather. This leaves a pattern to work with.

Then with a swivel knife, the traced lines are cut.

Then the work begins: using edge stamps and shaders, the edges along the cut lines will be stamped.

once complete, it will be stained and a protective finish follows

ZThen the the strips in the photo will be stitched to the opposite side of the tooling. then the map can be slid inside the frame.

When you roll it up you see the tooled map on the leather.

mP

background.jpg

Aye... Plunder Awaits!

Link to comment
Share on other sites

background.jpg

Aye... Plunder Awaits!

Link to comment
Share on other sites

somehow I deleted the files showing the tooling before stain...

The color turned out a bit darker than I expected, but will still work... oh well here is progress:

https://picasaweb.google.com/lh/photo/hw2W1DMifvOHKcQF87Bi-osHQv063_3yt8uZINcLaKo?feat=directlink

https://picasaweb.google.com/lh/photo/QPvgPmIoQ_Um5qciZKDLX4sHQv063_3yt8uZINcLaKo?feat=directlink

mP

background.jpg

Aye... Plunder Awaits!

Link to comment
Share on other sites

And as the woman who commissioned it, can I even tell you how excited I am seeing this come along!!!! (So excited I even found my pub password when Pete told me he was putting the progress reports up here :) )

I was lucky enough to win the auction for the map case he made for the Dead Men's Chest Auction at Fort Taylor a couple years back, and I can't wait to have the sister map frame to go with it and be a part of my Port Royal presentation!!

Beautiful Pete, just beautiful!!

Diosa De Cancion

aka Mary Read

www.iammaryread.com

Link to comment
Share on other sites

Pete, that is just wonderful!I love that I now have the 1668 Port Royal map on the outside of the doc case, then my 1756 map inside :) Beautiful work sir, as always!!! Thank you!!! Now I can't wait to see it in person!!

Diosa De Cancion

aka Mary Read

www.iammaryread.com

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
&ev=PageView&cd%5Bitem_id%5D=19278&cd%5Bitem_name%5D=map+frame+project&cd%5Bitem_type%5D=topic&cd%5Bcategory_name%5D=Crafting Kit"/>