Jump to content

Steampunk Weapons


Patrick Hand

Recommended Posts

  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

Here's the small (about 8" long) cap pistol I redid. Chain Shot found it at a junk shop and paid $5 for it. Still needs more decoration on the stock, especially on the other side, as it is plain. I'm thinking maybe black tribal tattoo designs? The skull on the stock end was just for fun. The good luck charms are a cross, a falling star, and the all-seeing eye, so I'm covered! LOL

100_3225.jpg

100_3226.jpg

...schooners, islands, and maroons

and buccaneers and buried gold...

RAKEHELL-1.jpg

You can do everything right, strictly according to procedure, on the ocean, and it'll still kill you. But if you're a good navigator, a least you'll know where you were when you died.......From The Ship Killer by Justin Scott.

"Well, that's just maddeningly unhelpful."....Captain Jack Sparrow

Found in the Ruins — Unique Jewelry

Found in the Ruins — Personal Blog

Link to comment
Share on other sites

Just found this "Atomic SteamPunk Disruptor Ray DIY"

steampunkdisrupterray.jpg

Complete instructions here

http://hacknmod.com/hack/make-a-steampunk-atomic-disruptor-raygun-from-old-parts/

Some days even my lucky rocketship underpants won't help....

Her reputation was her livelihood.

I'm a pirate, love. By nature and by choice!

My inner voice sometimes has an accent!

My wont? A delicious rip in time...

Link to comment
Share on other sites

I love the old test tubes. My dad was a TV repairman for Sears, so as a kid, I saw a lot of those! LOL

...schooners, islands, and maroons

and buccaneers and buried gold...

RAKEHELL-1.jpg

You can do everything right, strictly according to procedure, on the ocean, and it'll still kill you. But if you're a good navigator, a least you'll know where you were when you died.......From The Ship Killer by Justin Scott.

"Well, that's just maddeningly unhelpful."....Captain Jack Sparrow

Found in the Ruins — Unique Jewelry

Found in the Ruins — Personal Blog

Link to comment
Share on other sites

My brother has practically cornered the market on old tubes...I thi k it's an obsession. Then again he's a born Steampunker for as long as I remember.

Some days even my lucky rocketship underpants won't help....

Her reputation was her livelihood.

I'm a pirate, love. By nature and by choice!

My inner voice sometimes has an accent!

My wont? A delicious rip in time...

Link to comment
Share on other sites

OK Heres the finished product minus a flourish to one side I will add later when I find a pewter picture frame I can pirate to do the deed. There is no trigger because it is "turned on" By a potientiometer dial at the rear to control the frequency of pulse force. This is truely an Air Ship Pirate weapon in my mind.

IMG_2961.jpg

IMG_2963.jpg

IMG_2964.jpg

Edited by oderlesseye

http://www.myspace.com/oderlesseye
http://www.facebook....esseye?ref=name
Noquarter2copy.jpg
Hangin at Execution dock awaits. May yer Life be a long and joyous adventure in gettin there!
As he was about to face the gallows there, the pirate is said to have tossed a sheaf of papers into the crowd, taunting his audience with these final words:

"My treasure to he who can understand."

Link to comment
Share on other sites

Oderless..... it would be evil of me to ask if you have ever heard about el-wire......... (I'll look up the link and post it kinda soon......) boy... are you goinna curse me when you see what you can do with that stuff....... :ph34r:

Link to comment
Share on other sites

Eye really don't know wot ye referencing to thar Patrick Hand...But post it soon because I need to make another gun for myself as My wife swiped the one posted. I am currently working with hobby kits you can buy at Frys, to make blinking lights .I fully intend on a new design having learned from the first one, with blinking lights..I just wish I knew how to make them blink in a series 1-2-3-4 ect instead of altogether.

http://www.myspace.com/oderlesseye
http://www.facebook....esseye?ref=name
Noquarter2copy.jpg
Hangin at Execution dock awaits. May yer Life be a long and joyous adventure in gettin there!
As he was about to face the gallows there, the pirate is said to have tossed a sheaf of papers into the crowd, taunting his audience with these final words:

"My treasure to he who can understand."

Link to comment
Share on other sites

El-wire is thin low powered ....ergh wire that looks like neon lights.....

Anyway.... two links.....

http://en.wikipedia.org/wiki/Electroluminescent_wire

http://www.coolight.com/category-s/1.htm

Now a switch that turns on alla the el-wire when you grab the ray gun... and then a lazier and pezo buzzer when ye pull th' trigger........ (I just don't have the time to fix that before Burning Man....... rats.....)

I haven't played with the stuff yet... but I've seen what you can do with it.... And it is cool......

Link to comment
Share on other sites

Hmmmm.....mind starts twirling.

...schooners, islands, and maroons

and buccaneers and buried gold...

RAKEHELL-1.jpg

You can do everything right, strictly according to procedure, on the ocean, and it'll still kill you. But if you're a good navigator, a least you'll know where you were when you died.......From The Ship Killer by Justin Scott.

"Well, that's just maddeningly unhelpful."....Captain Jack Sparrow

Found in the Ruins — Unique Jewelry

Found in the Ruins — Personal Blog

Link to comment
Share on other sites

Alright pat..Eye went ahead and ordered a pre-made it of El-wire..

Eye think it will make a nice effect.

http://www.myspace.com/oderlesseye
http://www.facebook....esseye?ref=name
Noquarter2copy.jpg
Hangin at Execution dock awaits. May yer Life be a long and joyous adventure in gettin there!
As he was about to face the gallows there, the pirate is said to have tossed a sheaf of papers into the crowd, taunting his audience with these final words:

"My treasure to he who can understand."

Link to comment
Share on other sites

On my raygun, I wanted to use el-wire instead of the dan-d-line (the aluminum wire)that I used... and rig it so that when you grabbed the grip, it would turn on the el-wire, and a LED in the jar of liquid....

The spoon handle/belt hook broke, so when I have time to play with it some more, I might add it then.....

Link to comment
Share on other sites

  • 2 weeks later...

Eye won a rifle stock on -E- bay..Hmmm lemme see wot will this

cosplay weapon will turn into...

!BW+2B4gB2k~$(KGrHgoOKiUEjlLmWrB3BK,GIZKQ2Q~~_1.JPG

http://www.myspace.com/oderlesseye
http://www.facebook....esseye?ref=name
Noquarter2copy.jpg
Hangin at Execution dock awaits. May yer Life be a long and joyous adventure in gettin there!
As he was about to face the gallows there, the pirate is said to have tossed a sheaf of papers into the crowd, taunting his audience with these final words:

"My treasure to he who can understand."

Link to comment
Share on other sites

  • 2 weeks later...

Eye got side tracked and decided to finish my bandoleer/baldric with Air ship mini torpedos

IMG_3091.jpg

Edited by oderlesseye

http://www.myspace.com/oderlesseye
http://www.facebook....esseye?ref=name
Noquarter2copy.jpg
Hangin at Execution dock awaits. May yer Life be a long and joyous adventure in gettin there!
As he was about to face the gallows there, the pirate is said to have tossed a sheaf of papers into the crowd, taunting his audience with these final words:

"My treasure to he who can understand."

Link to comment
Share on other sites

I just finished up this "Vampire Hunter's Vambrace".

It's covered in weapons... well... you'd consider them weapons if you were a vampire...

It's got an 16" side mounted "punch stake", a jar of "holy water", 2 bulbs of (fake) garlic, and a cross mounted on the fist plate between two 1 3/4" spikes... not to mention the center pouch and metal box that could store even more weaponry... or collected fangs...

VampireHunter4.jpg

VampireHunter1.jpg

VampireHunter3.jpg

VampireHunter7.jpg

VampireHunter8.jpg

This is obviously for a Vampire Hunter who has been hunting the nocturnal predators so long that he has begun to emulate them a bit more than others would feel comfortable with...

Commodore Ashton "WeirdBeard" Synn

NyghtCraft Leatherwerks

Edited by Captain Synn

NyghtCraftLogoRed.jpg

Highest Quality Handcrafted Leather on or off the 7 seas!

Link to comment
Share on other sites

>>>> AND the Spikes must be said to be made out of silver ~ LoL.. Very nice werk thar!~

http://www.myspace.com/oderlesseye
http://www.facebook....esseye?ref=name
Noquarter2copy.jpg
Hangin at Execution dock awaits. May yer Life be a long and joyous adventure in gettin there!
As he was about to face the gallows there, the pirate is said to have tossed a sheaf of papers into the crowd, taunting his audience with these final words:

"My treasure to he who can understand."

Link to comment
Share on other sites

Those are cool.... I have never liked vambraces (they fit too tightly around my forearm).... but those are great... fantastic job....damn.. you did good..... :rolleyes:

And that is the kinda thing that I like to see posted.... "hey look at what a cool thing I made": yah sure the whole show off bit...... but hey... it motivates alla the rest of us to make something just as cool....

So thanks fer postin'... now we all gotta/have to "up" the notch and make even cooler stuff.....

Link to comment
Share on other sites

now we all gotta/have to "up" the notch and make even cooler stuff.....

Eye am werking on it! Eye am werking on it!

Edited by oderlesseye

http://www.myspace.com/oderlesseye
http://www.facebook....esseye?ref=name
Noquarter2copy.jpg
Hangin at Execution dock awaits. May yer Life be a long and joyous adventure in gettin there!
As he was about to face the gallows there, the pirate is said to have tossed a sheaf of papers into the crowd, taunting his audience with these final words:

"My treasure to he who can understand."

Link to comment
Share on other sites

I'm running into a dilemma with regards to my weapon design and could really use some ideas.

The inspiration for the design was started by a copper toilet float. I figure I'll use that at the rear end of the weapon and build the rest of it around the rod that screws into the float. I wanted the main part of the weapon to be bulbous and figured on using a vase, which I can cut down as needed, then figure out what I wanted for the front of the weapon. Jack offered to carve a handle for it and then I'd be set.

Here's my dilemma: I want to incorporate a gauge, perhaps some lights and a sound chip, to be powered by batteries and hooked up to a rheostat so that it can "cycle up". In order for this to work, the battery and wires need to go someplace and my original thought was for it to be inside the vase. However, in order for the vase to not rattle around on the brass toilet float rod, I would need to weld a washer onto the opening of the vase. This would make it impossible for me to get at the inner workings, such as when the battery died.

Any suggestions on how to get around this?

RHJMap.jpg

Link to comment
Share on other sites

Do you have a basic drawing of this weapon?

hard for me to give an answer without attributing

an unwanted modification/ suggestion....

I will venture this though..If the vase is

not see through, then I suggest maybe using Styrofoam

filling and then carve out the room you need for the electronics.

Home depot sells the expanding foam in a can.

Edited by oderlesseye

http://www.myspace.com/oderlesseye
http://www.facebook....esseye?ref=name
Noquarter2copy.jpg
Hangin at Execution dock awaits. May yer Life be a long and joyous adventure in gettin there!
As he was about to face the gallows there, the pirate is said to have tossed a sheaf of papers into the crowd, taunting his audience with these final words:

"My treasure to he who can understand."

Link to comment
Share on other sites

now we all gotta/have to "up" the notch and make even cooler stuff.....

Eye am werking on it! Eye am werking on it!

Well I'm not really sure how to take some of this... and I'm not really wanting to start some big thing either...

I did not post my pix to start some sort of "one-ups-man-ship" deal...

I certainly didn't say... "Hey here's my thing that's better than yours...".

I posted to attempt to participate in this forum. I'm always one who appreciates inspiring others in creative en devours... but, honestly, to make it sound like someone has to now step up and do better than me... not really cool.

I am certainly not in any competition with anyone here...

Ashton Synn

NyghtCraft Leatherwerks

NyghtCraftLogoRed.jpg

Highest Quality Handcrafted Leather on or off the 7 seas!

Link to comment
Share on other sites

I posted to attempt to participate in this forum.

Thats all im up to...Eye like to share the stuff eye werk on..

My reply to Pat has nothing to do with your post or anyone else.

I can only better myself.

I am just entering the steampunk genre and have not made it a goal to become a steampunk gadget God..LoL...I am having fun with this

because provides foder for tinkering.. All of the sudden Eye have a new interest in

simple electronics.."My Steampunk" is inspired by the Queen Mary event coming up in Sept.

Any event after that..I really ain't sure..yet.. I Like the Pirate community and don't

care to leave it for a cup of tea.

Edited by oderlesseye

http://www.myspace.com/oderlesseye
http://www.facebook....esseye?ref=name
Noquarter2copy.jpg
Hangin at Execution dock awaits. May yer Life be a long and joyous adventure in gettin there!
As he was about to face the gallows there, the pirate is said to have tossed a sheaf of papers into the crowd, taunting his audience with these final words:

"My treasure to he who can understand."

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...